R S T
RED Stone and Tile Adhesive
Elevate Your Tile Installation with Unmatched Quality
Red Stone and Tile Adhesive
TAPIK RED Stone and Tile Adhesive is a high-performance, cementitious polymer-modified adhesive designed for versatile applications. This single-component adhesive is formulated with activated dynamic polymers, making it ideal for both internal and external use.
TAPIK RED stands out for its exceptional adhesion properties, bonding effectively to concrete, plastered surfaces, and various other substrates. It is suitable for all types and sizes of tiles, as well as medium-sized stones, providing versatility for different construction needs. This adhesive is perfect for demanding applications such as fixing windowsills, door frames, and stone cladding.
In addition to its superior performance, TAPIK RED is a cost-effective solution, offering high quality at a competitive price. It complies with IS: 15477-2019 and EN 12004/ISO 13007 standards, classified as C2TE adhesive, ensuring it meets stringent industry requirements.
Whether for new construction or renovation, TAPIK RED Stone and Tile Adhesive delivers the performance and reliability needed. Its ease of use and excellent bonding strength make it a preferred choice for professionals and DIY enthusiasts alike. Choose TAPIK RED for your next project and experience the difference in quality and performance.
Application Method
- Surface Preparation: Ensure the substrate (surface) is clean, dry, and free from dust, grease, or any loose particles. This is crucial for proper adhesion.
- Tools Needed:
-
- Notched trowel
- Tile spacers
- Level
- Rubber mallet
- Damp cloth
- Measuring tape
- Tile cutter or wet saw
-
-
Mixing the Adhesive:
-
Pour 5 – 7 liters (as per the consistency you require) of cold or room temperature water into a bucket or a container and add the powder to the water while continuously stirring with a mixing paddle attached to a drill or a hand mixer until it reaches a smooth, lump-free consistency. Allow the mixture to rest for 5-10 minutes this helps the polymers in the adhesive to activate fully, after resting give the mixture a final stir before using it.
-
- Applying the Adhesive:
- Use the notched side of the trowel to spread the adhesive evenly on the substrate. Apply it in one direction to ensure consistent coverage.
- Cover only a small area at a time (enough to place a few tiles) to prevent the adhesive from drying out before you can set the tiles.
- Setting the Tiles:
- Press the vitrified tiles firmly into the adhesive, starting from the bottom and working your way up.
- Use tile spacers to maintain even gaps between the tiles.
- Check the alignment with a level and make adjustments as needed.
- Tap the tiles gently with a rubber mallet to ensure they are properly set.
- Cleaning Excess Adhesive:
- Wipe off any excess adhesive on the tile surface with a damp cloth before it dries.
- Expansion Joints:
- Provide expansion joints as needed to accommodate any movement in the substrate or tiles.
- Curing:
- Allow the adhesive to cure for about 24 hours before grouting or exposing the tiles to water
Technical Specifications
| Physical Properties | |
| Color | |
| Consistency | |
| Density | |
| Performance Characteristics | |
| Open time | |
| Adjustability time | |
| Curing time | |
| Adhesion Strength | |
| Shear strength (dry condition 28 days) | |
| Shear strength (heat ageing condition 28 days) | |
| Shear strength (wet condition 28 days) | |
| Tensile strength (dry condition 28 days) | |
| Tensile strength (wet condition 28 days) |
FAQs
Can I lay vitrified tiles of size 8ft by 4ft on the wall and flooring with TAPIK RED Stone and Tile adhesive?
- Answer: Yes, definitely TAPIK RED Stone and Tile adhesive can be used to lay vitrified tiles of any size on walls and floors.
On What surfaces can TAPIK RED Stone and Tile Adhesive be used?
- Answer: TAPIK GREEN tile adhesive can be used on clean, dry, and stable surfaces including concrete and cementitious screeds. It is ideal for interior and exterior applications on walls as well as floors.
What category of tile adhesive is TAPIK RED Stone and Tile Adhesive according to IS 15477?
- Answer: It is Type 3 Tile Adhesive and is a premium-grade adhesive designed for setting ceramic and vitrified tiles of any size. It has high adhesion strength, Sag-resistant properties, Water resistance and Heat resistance. Suitable for interior and exterior applications on walls, floors, and countertops.
What is the coverage area of TAPIK RED Stone and Tile Adhesive?
- Answer: The coverage area depends on the trowel size and the substrate. Typically, it covers about 40-45 sq. ft. per bag when applied with a 6mm x 6mm notched trowel. However, many times surfaces are not properly leveled so coverage is highly affected due to this.
Is TAPIK RED Tile Adhesive suitable for exterior use?
- Answer: Yes, TAPIK RED Stone and Tile adhesive is designed for interior and exterior use.
Client Testimonials and Customer Reviews
- “I am a tile contractor working in Mumbai for 25 years. I recently had the opportunity to use Tapik Green Tile Adhesive for a bathroom renovation project. The tiles were 2ft x 2ft in size, and I applied them on both the walls and the floor. From the moment I started mixing the adhesive, I could tell it was a high-quality product. The consistency was perfect, making it easy to spread evenly on the surfaces.
One of the standout features of this adhesive is its excellent bonding strength. The tiles stayed firmly in place without any slipping or sagging. This was particularly important for the vertical wall application, where maintaining alignment can often be a challenge.
The result was a beautifully tiled bathroom that not only looked great but also promised long-lasting durability. My client was extremely satisfied with the quality of the work. I highly recommend TAPIK GREEN Tile Adhesive to fellow contractors looking for a high-performance tile adhesive. –Venkat S.
- “As an architect, I was initially skeptical about using Tapik Green Tile Adhesive for a recent project. However, the company representative convinced me to give it a try. After the work was completed, my tile contractor praised the adhesive’s quality and bonding strength. He was so impressed that he plans to use it in his future projects. Based on this positive experience, I have also recommended Tapik Green to a colleague for his upcoming project. The adhesive has proven to be reliable and effective, making it a great choice for tiling work.”– Ravi K.
- “I am an apartment owner; I insisted my tile contractor use TAPIK GREEN Tile Adhesive for our bathroom renovation. Initially, he was hesitant as it was a new product and brand for him, but I asked him to try it, as I know one of my friends has already used it for his kitchen tiles. After completing our bathroom work, he was thoroughly impressed with the adhesive’s quality and bonding strength. He even said that he would use Tapik Green tile adhesive for his other projects. The tiles look fantastic, and I couldn’t be happier with the results. I highly recommend Tapik Green Tile Adhesive!” –Sanjay V.
CLICK ON PRODUCT NAME TO EXPLORE MORE